Choosing an iAHRS sensor in 50 seconds
0:50 · English narration · YouTube Shorts
ROBOR / ENGINEERING NOTES
Practical guides for sensor integration
Start with your measurement needs. Check the model, interface and installation conditions before integration.
Product selector and integration resources →V2 / V3 3D demonstration ▶Product sheets (PDF) ↓Application videos ▶
ROBOR / SHORTS
Short videos on sensor selection, connection and installation
Three checks for your USB AHRS connection
0:47 · English narration · YouTube Shorts
AHRS vs IMU: from measurements to orientation
1:00 · English narration · YouTube Shorts
Four checks before mounting an orientation sensor
1:02 · English narration · YouTube Shorts
AHRS vs IMU: choosing an orientation sensor
Start with the output your equipment needs: acceleration and angular rate, or estimated attitude and heading.
Connecting a USB AHRS: from COM port to live data
Identify the USB device, install the matching driver and verify actual sensor data.
RS-232, CAN or RS-485: selecting an iAHRS interface
USB is common to all interface variants; the model suffix identifies RS-232, CAN or RS-485.
iAHRS V1, V2 and V3: compare platforms and interfaces
Compare sensor components, installation requirements and communication options before choosing a generation.
Installing an orientation sensor in a robot or machine
Document orientation, magnetic surroundings, power and communication settings to make evaluation repeatable.